Mechanical watch can stick to how long does not adjust the issue [China Watch Network]

How long does it take to winding a clock? Ordinary time to go on a watch should not be less than thirty-six hours, so the clockwork must have a certain number of laps, in order to ensure the necessary time go on, so Clockwork must have sufficient high intensity of fatigue and high resistance to elastic fatigue. Previous spiral winding more than half of the application of high-carbon steel, low fatigue strength, torque deteriorating, the use of a few years after the clock about rupture, the current domestic wristwatch has been widely used stainless steel or base alloy as raw materials T-shaped Tissot spring, it has the advantages of high strength, high elastic modulus, high fatigue strength, corrosion resistance and anti-magnetic, it not only has sufficient energy storage and can improve the travel time accuracy.

The original power of the clockwork quality rival watch time-consuming function has a tense effect. It should have sufficient, but not excessive, input torques. Machine clock winding Truth is that when the clockwork is gradually tightened, with the increase of torque, the balance will certainly increase the swing, when the clockwork is fully tightened, when the maximum moment of things, the watch will stop activities . Such as the balance of the swing is still not up to the demand of the affirmative swing, the need to consider whether the clockwork input torque sufficient. Input torque over the General Assembly gave birth to "hit pendulum" signs. Clockwork at any time showed a greater shake, the speed of a mechanism experienced by the oscillation will change, when the wrist watch will appear when the fast and slow signs, which is not the case when the input torque is not on.

Whether the hand or the automatic winding, winding power will be stored into the barrel, and then slowly released evenly, the mechanical watch, if full string, then say less can go more than thirty hours, of course, compare There are three high-end chain, the seven-day chain, the chain on the 15th, and even the chain on the 30th.

I think you may say that the power reserve shows? This means that there is a pointer or color wheel on the dial that shows how much power remains, prompting you when to wind up. This power display device used in high-end mechanical watch, rival winding table more useful, a lot of automatic winding also has this device.

Mechanical watch sub-automatic and manual. Automatic sub-automatic and semi-automatic.

The so-called automatic table, not in the true sense of the automatic. In fact, it is also "passive" and must be worn when used. Swing the watch by swinging the arm. When the watch swinging, the eccentric wheel inside rotation, but also drive gear winding. And then through the regular release of winding tension, the timing gear rotation. Therefore, people also call it a mechanical automatic watch. If the automatic table is not placed, after a period of winding tension release is completed, the automatic table also stopped.

Therefore, at the beginning of wearing the automatic watch has stopped using the time, generally have a good time, and then manually approach, by rotating the watch winding watch will be enough to make it normal rotation, start working. Then, not necessary, it will give yourself a clockwork. But it must be worn daily, without a watch, and the next day it will not "strike".