Container and Lifting Container Utilization

Many customers often encounter trays or boxes of what size they design, which makes it easier to load products and improve the unprecedented utilization of containers and other containers. Ciqiang Packaging uses professional packing software analysis to do professional design for these customers. Its essence is to optimize the packing of containers with regular shapes in container containers, vans, crates, and trays. Container packing solutions are quickly designed to achieve higher utilization of container space and load capacity!

First introduce the container, the container you see a lot, but the actual container found that the size of the container on the Internet is a little out of reality.

About size:

One, 20-foot flat cabinet, length: 5.90*2.34*2.38 meters. This is the internal dimensions of the cabinet. If the box is new, the error is within 1CM.

Second, a 40-foot flat cabinet, length: 11.95*2.34*2.38 meters. This is the internal dimensions of the cabinet. If the box is new, the error is within 1CM.

Third, the 40-foot high cabinet, length: 11.95 * 2.34 * 2.68 meters. This is the internal dimensions of the cabinet. If the box is new, the error is within 1CM.

About the cube number of the cabinet:

First, a 20-foot flat cabinet with a cubic capacity of 28-29 cubic meters.

Second, a 40-foot flat cabinet with a cubic capacity of 57-59 cubic meters.

Third, a 40-foot high cabinet, with a cubic capacity of 66-68 cubic meters.

About the weight of the cabinet (About the weight, sometimes you can contact the freight forwarding company, some companies will not be the same)

First, a 20-foot flat cabinet with a weight of 17.5 tons.

Second, a 40-foot flat cabinet with a weight of 22.0 tons.

Third, a 40-foot high cabinet with a weight of 22.0 tons.

Here, I can tell you with certainty that the width and height of the cabinet are certainly accurate. The length needs to be preserved. Some of my friends may ask, why do I have to measure the size of the 40-foot flat cabinet with a length of 12 meters? Well, please, look at the door of the container. Do we want to leave a small gap for it? You don't want to let the door smash your product when it closes? This is not worth the candle. Another point is that there are two protruding corners in the front upper corner of the container, which will occupy some of the volume. Therefore, when we calculate the length, we should try to leave some room for ourselves.

Packing notes:

1. Limits on the discharge of goods

Due to the nature of the goods, the goods are placed according to the specific requirements of the steamed bread. For example, the goods are only allowed to stand.

2. The maximum stacking level of the cargo

For example, the number of stacked boxes for heavy machinery should not exceed 2 layers.

3. Requirements for cargo carrying capacity

When stacking different cargoes, their load-bearing capacity should be considered to avoid excessive compression and damage to the goods. For example, the carton can only be placed on the wooden box.

4. Reasonable arrangements for placing gaps

The presence of gaps in the actual packing is unavoidable, and in order to ensure the safety of cargo transportation, it is necessary to leave gaps in advance to fill the buffer material or add fasteners. For example: fragile items need to be filled with cushioning material.

However, through manual design and installation of containers, the space utilization rate of containers is only 80%-85%, and some of them are even lower. The efficiency of container space utilization can be significantly improved through professional box packing software, and the 3D schematic diagram can be generated to guide the packing. . Ciqiang Packaging provides professional packing solutions for exporting enterprises through professional packing software to improve logistics efficiency and reduce the cost of comprehensive logistics for customers.