Guige Industrial constant temperature bath heating / temperature measurement / regulation control part introduction

The components of the thermostatic bath temperature control produced by Guige Industry are as follows: heating part: heating the thermostatic bath with an electric heating tube and measuring the temperature part: generally using industrial platinum thermal resistance as the temperature measuring element, converting the measured temperature value into the corresponding The resistance signal shows the temperature adjustment control part in the constant temperature bath to the matching display adjustment instrument: the temperature display adjustment instrument performs PID (proportional, integral, differential) adjustment according to the difference between the measured temperature in the constant temperature bath and the set temperature. The silicon conduction angle controls the heating power of the electric heating tube. The heating power changes with the temperature difference. When the set temperature is reached, the regulator balances the heat generated by the heating tube and the lost heat through the thyristor to achieve the purpose of constant temperature . The regulation control part is that when the temperature in the constant temperature bath is lower than the set temperature, the output signal of the temperature display adjustment instrument controls the relay to turn on to heat the heating tube, and when the temperature is higher than the set temperature, the control indicator of the temperature display adjustment instrument is turned off to stop the heating tube Heating to achieve the purpose of constant temperature. However, due to the thermal inertia of the heating tube in this control method, the temperature in the constant temperature bath fluctuates greatly above and below the set temperature, and the constant temperature effect is not as good as above.

Self Adhesive PTFE Tape without Release Paper is made of PTFE Coated Glassfiber Fabrics with one side Silicone adhesive, which is pressure sensitive.

It can resist high temperature up to 260 degrees and the PTFE surface is nonstick which can be used as release film. Jiangsu Youngsun New Materials Co.,Ltd are supplying lots of customers in packing and insulation industry.

Self Adhesive PTFE Tape Without Release Paper

Self Adhesive PTFE Tape, Self Adhesive PTFE Tape Without Release Paper

Jiangsu Esone New Material Co,.Ltd , https://www.cookware-manufacturer.com