Start and stop of air compressor for small spray dryer
Shanghai Xinzhuang small spray dryer air compressor control air compressor start and stop, click the air compressor button black area (above), air compressor start (button to "start"), click below, air compressor stop (The button moves to "stop"). The heater controls the start and stop of the electric heater, click the heater button black area (above), the heater starts (the button moves to "start"), click below, the heater stops (the button moves to "stop"). Note: The heater will not start until the fan is started. Turn off the fan heater and disconnect it automatically. The fan setting sets the rotation frequency of the extension, press the value box to pop up the numeric keypad, press the CLR button to clear the number, then enter the desired value and press the ENTER key to modify it. The peristaltic pump manually controls the operation of the peristaltic pump. Click the black button of the peristaltic pump (above) (display ON), the peristaltic pump starts automatically, the display below, the peristaltic pump stops (displays OFF). The needle is set to pass the running frequency of the needle. The value represents a few seconds to start, press the value box, pop up the numeric keypad, press the CLR button to clear the number, then enter the desired value, press ENTER to modify it. The peristaltic pump setting sets the feed amount of the peristaltic pump r/m), press the value box to pop up the numeric keypad, press the CLR key to clear the number, then enter the desired value and press the ENTER key to modify it. Description: Click on the control panel to enter the interface (2), click on the main menu to enter the interface (1) The inlet air temperature is adjusted to adjust the stability of the inlet air temperature, and the inlet air temperature display value and the inlet air temperature setting are found only when dry. When there is a large fluctuation between the values, the inlet air temperature self-adjustment is required to ensure that the inlet air temperature setting value is consistent with the inlet air temperature display value. Before the self-adjustment is started, the inlet air temperature setting value and the inlet air must be ensured. The temperature difference between the temperature display values ​​and 50 degrees or more, for example, the inlet air temperature setting value is 120 degrees, and the inlet air temperature is displayed below 70 degrees, that is, the set value > display value is 50 degrees or more. Click the air temperature self-adjusting button black area (above) (display ON), and the inlet air temperature is automatically adjusted. After the completion of the self-confirmation, it will automatically end. If the self-adjustment is completed before the self-adjustment is completed, you need to click the inlet air temperature self-adjustment end button.
Note: After the fan and heater are started, the inlet air temperature self-adjustment function is set. The inlet air temperature setting value is set to the inlet air temperature. Press the value box to pop up the numeric keypad, press the CLR button to clear the number, and then input the required number. The value is changed by pressing the ENTER key. The inlet air temperature display value shows the actual value of the inlet air temperature. The inlet air temperature self-adjusting end block is in the process of self-adjustment of the inlet air temperature. If you want to interrupt the self-adjustment in the middle, press this button to adjust the outlet air temperature and only dry. When there is a large fluctuation between the wind temperature display value and the outlet air temperature set value, the outlet air temperature self-adjustment is required to ensure that the outlet air temperature set value is consistent with the outlet air temperature display value, and the note money is opened. It must be ensured that there is a temperature difference of 50 degrees or more between the set value of the outlet air temperature and the value of the outlet air temperature. For example, if the outlet air temperature is set at 70 degrees, the outlet air temperature display value is above 120 degrees, that is, the display value > set value More than 50 degrees.
Set the outlet air temperature setting value, press the value box to pop up the numeric keypad, press CLR to clear the number, then enter the desired value and press ENTER to modify it. The output value of the outlet air temperature shows the actual value of the wind temperature. The wind temperature is self-adjusting. When the air temperature is self-adjusting, you want to interrupt the self-adjustment and press this button.
Shanghai Xinzhuang welcomes your inquiry and purchase!
Usb Fan Kmart,Mini Fan Handheld,Power Bank,Mini Charger
Triple C International (Shenzhen) Co.,Ltd. , https://www.ccc-triple.com