Shanghai Xinzhuang Instrument Aseptic Homogenizer
So what should you pay attention to when using a sterile homogenizer? The senior engineer from Shanghai Xinzhuang will answer your questions:
Things to be aware of when using a sterile homogenizer:
(1) The power plug must be inserted tightly. Looseness may affect the computer controller to cause a crash. If there is a crash, please turn off the rear power switch and restart after 3 minutes of shutdown.
(2) Do not open the homogenizer door when working on the hammer plate to avoid overflow of the sample liquid. The “On/Off†button should be pressed and the device automatically stops running. When the door is closed, press the “ON/STOP†button again and the device will automatically complete the remaining work.
(3) If the instrument is not used for a long time, turn off the power and remove the plug.
(4) The bottom of the homogenizer door prevents accidental rupture of the homogenized bag, which is convenient for cleaning the spill. The bottom design is empty, and the water tray can be placed. Therefore, do not extend the hand from the bottom when the instrument is running, so as not to smash the finger. .
(5) Before the machine is running, please check if there is any foreign matter in the homogenizer to avoid malfunction and damage to the homogenized bag during work. (6) Hard, bone, and ice-like substances should not be used to avoid damage to the homogeneous bag.
(7) The instrument and the homogenized bag should be stored away from direct sunlight. In particular, the homogenized bag should be stored in a place free from sunlight or ultraviolet rays to avoid aging.
(8) When the amount is small, when the speed is high, when the homogenized fiber is tough, the back of the high-frequency infrared carbon-sulfur analyzer can be used to adjust the spacing between the slap board and the window to achieve better homogenization.
Maintenance of the instrument:
Wipe the instrument casing and the hammering plate in the homogenizing box with a clean rag. In particular, the homogenized bag should be cleaned after being damaged. Always turn off the power when performing this work.
Instrument failure and troubleshooting:
(1) If the LCD does not display when the instrument is not operating under the condition that the door is closed, check if the power supply is properly connected and the fuse is intact.
(2) If the instrument is running abnormally, check if the connecting bolts and the hammer plate are loose. After long-term work, if the hammer and the sleeve are dry and dry, it is necessary to clean up and add new grease.
Shanghai Xinzhuang Experimental Instrument Co., Ltd. specializes in the production of constant temperature shaker, low temperature water tank, water bath constant temperature oscillator, gas bath constant temperature oscillator, shaker, incubator and other related instruments. The factory has strong technical strength and various technical indicators are leading domestically.
The Heating Mantle is widely used in hospitals, biomedicine, life science, agriculture and forestry, education, health and epidemic prevention, animal husbandry and veterinary, scientific research institutions, laboratories and other departments at all levels. We specialize in manufacturing lab instruments, such as biology Microscope, histology microtome, heating mantles, cover slides, Lab Consumable materials and so on.
Heating Mantle
Heating Mantle,Lab Heating Mantle,Heating Mantle Price,Digital Heating Mantle
Xinxiang Vic Science&Education Co.,Ltd. , https://www.hnbiologyspecimen.com