Programmable constant temperature and humidity laboratory installation site selection has to pay attention to
The programmable constant temperature and humidity laboratory is mainly used to test the performance of materials in various environments and to test various materials for heat resistance, cold resistance, dry resistance and moisture resistance. It is widely used and used in many industries.
The most suitable industries for programmable constant temperature and humidity labs are electronics, electrical appliances, communications, instruments, vehicles, plastic products, metals, food, chemicals, building materials, medical, aerospace, etc. In these industries, single-point constant temperature and humidity are used. The test chamber is used to detect the quality of the product. This kind of product can be divided into "desktop" and "vertical". The main difference between the two types is that the temperature and humidity can be different. You can make specific choices according to different needs.
Below, we will choose the installation location of the programmable constant temperature and humidity laboratory.
1. Try to choose a place near the window. (Because the programmable constant temperature and humidity laboratory has exhausting equipment, the exhaust duct extends through the window to the outside of the window, and the heat in the overheated part is discharged. In addition, the problem of air circulation is also considered.)
2. If the temperature of the product's programmable constant temperature and humidity laboratory is high, such as 80 ° C or 80 ° C, etc., if you can choose the first floor, please choose the first floor, because the floor will be higher when the temperature is higher. Heat conduction, when you choose to be above the 2nd floor, it is best to do the treatment on the ground, or spray paint is also possible.
3. Programmable constant temperature and humidity laboratory choose the location of the installation, please try not to rely on the office, because the programmable constant temperature and humidity laboratory work, due to the operation of the fan, it will produce noise (less than 75db), if too Tiny sounds sometimes occur in places close to the office. This can be avoided if the form of the wind cabinet is used instead and the sound insulation cotton is attached to the inside.
Related Products: Tianjin High and Low Temperature Damp Heater Compressor Shanghai Environmental Test Chamber Operation Jiangsu High and Low Temperature Tester Calibration Procedures Step-in Constant Damp Heat Test Chamber Manufacturer
Dish Rack,dish drying rack,kitchen dish rack,dish drainer rack,dish rack sink,etc. The materials used are 304 stainless steel, easy to clean, never rust!
China Kichen Rack,Sink Grid,Stainless Mesh Storage Baskets,Kitchen Wire Storage, we offered that you can trust. Welcome to do business with us.
Kichen Rack is made of high quality 304 stainless steel, This kind of material steel luxury, never rust, resist corruption, easily clean, safe, healthy and durable. Prevent rust or chemicals from contaminating food and damaging health
Dish Rack
Dish Rack,dish drying rack,kitchen dish rack,dish drainer rack,dish rack sink
Shenzhen Lanejoy Technology Co.,LTD , https://www.szsmallcompressionspring.com