Choose a solid wood wardrobe to pass ten
[ Chinese wardrobe network ] Modern urban life is busy and tense, a warm home can bring everyone the most relaxing leisure time. But how can you make your home warm and comfortable? With a little skill, you can easily create a pleasant home. Life Home Xiaobian has prepared a series of fashion information from house decoration to home decoration to help you have a relaxed and comfortable life.
Because of the high price, solid wood wardrobes are a symbol of grades and identity in the minds of many consumers, but now many consumers can't tell the difference between solid wood wardrobes and general panel wardrobes, and it is not clear how to buy them. Good quality solid wood wardrobe. In fact, experts told reporters that as long as the solid wood wardrobe can pass the following "ten customs", it is a good wardrobe.
Determine if the wardrobe is really made of solid wood
A mystery to determine whether a solid wood wardrobe is: wood grain and thrift. Such as a cabinet door, the appearance looks like a pattern, then the position corresponding to the change of the pattern, the corresponding pattern on the back of the cabinet door, if the correspondence is very good, it is a pure solid wood cabinet door. In addition, watching thrift is also a good way to identify solid wood: optimistic about the location of the scar side, and then find the corresponding pattern on the other side.
Determine what kind of tree is made of wardrobe
This is a factor that directly affects price and quality. Ordinary solid wood wardrobes usually use eucalyptus, white oak, ash, eucalyptus, eucalyptus, rubber wood, and eucalyptus, while the precious mahogany wardrobes mainly use rosewood, wenge, and rosewood. The market for solid wood wardrobes is rather chaotic, and there are often times of shoddy and confusing trees. It is best to buy brand-name products. At the same time, it should be noted that the price of wood is rising day by day, and it is absolutely cheap to be too cheap.
Observe the good and bad wood
Open the wardrobe door and drawer to observe whether the wood is dry and white, and the texture is tight and delicate. If you have a wardrobe made of materials such as particle board, MDF and one-time forming board, open the door or drawer and smell it for a pungent smell.
Observe the wood with or without defects
The main force-receiving parts of the closet, such as the uprights and the load-bearing horizontal strips connecting the columns to the ground, should not have large knots or cracks. The structure is firm, the frame must not be loose, and it is not allowed to break or break the material. The components of the wood-based panels used in the wardrobe should be edge-sealed, and the various accessories must be installed with few pieces, missing nails and nails.
Observe the strength of the board
Board emphasized is finger to feel the fastness of the board. One side of the material should have a well-shaped skeleton to fix. If the skeleton is sparse, the surface will feel empty and false, and the panel will vibrate greatly. The bottom of the drawer should be pressed by hand to test the strength. Generally, the bottom of the partition is multi-layered with a large area. The partition should be made of five-layer board. Doors and drawers switch to be flexible. When the panel is covered with thin wood and other materials, the color of the product should be similar, and the paint film on the surface of the product is not allowed to wrinkle, stick and leak paint.
Check the stability and safety to observe whether there is a tilt of the drawer or the door frame, whether there is a skew of the eye caused by the twisted eye socket or the eye hole is too large, and the hoe is not strict. The wooden wardrobe should have safety and stability. When the two doors are opened 90 degrees, the hand can be gently pulled forward, the cabinet can not be tilted forward automatically; the glass of the bookcase door should be edging; the mirror and the dressing The back plate should be installed on the table, and the bead should be fixed on the glass surface. Individual parts of the wardrobe (such as legs, drawers, doors or brackets) must be supported. You should gently push the top corner of the closet or sit on one side and try to see if the closet is secure.
Check interface
Wardrobes with dovetail or butterfly joints should be purchased. The heavier wardrobe should be screwed with a protective block in the corner and glued. As for the back plate part, it is also necessary to check whether it is set and the screws are attached.
Check the slides and latches of the drawer
The drawer should be strong and secure with the screws tightened inside. It is a good idea to open the drawers, the event table, the doors and other parts to ensure that they can be used freely and properly connected.
Check surface
Place your hand on the surface of the closet and check carefully whether the polished surface is smooth. In particular, check whether the foot and other parts are rough, whether the paint is streaked, whether the pigment in the corner is too thick, and whether there are cracks or bubbles.
Wardrobe to "stand upside down"
Reverse the chair and the covered wardrobe to see how they are made. As for the table, check from the bottom. See if the seams are reinforced with screws and wedges? Is the strip fastened to the crosspiece? There is no excess glue or filler in the seam. Text from the network
Round Coffee Table,Glass Coffee Table,Marble Coffee Table,Coffee Table With Storage
Anji TianWei Steel and Plastic Products Co.,Ltd , https://www.twchair.com