How to improve the working efficiency of slime dryer
2021-04-20 07:01:39
How to improve the working efficiency of slime dryer The new slime dryer is a kind of drying equipment with large processing capacity. It is widely used in metallurgy, building materials, chemical industry and other industries.
The structure of the dryer was designed to influence the production and quality of the activated coal slurry. Affecting the drying effect is the comprehensive balance problem of the whole drying supporting system. The basic condition for the high quality and high yield of the dryer is to achieve the balance of the above three points.
The hot blast stove is the key equipment for drying and heating, and the drying yield and quality of the materials are selected. The extension of individual export trade to the service industry has already won in some enterprises in China. This confirms that the supply processing plan and the package of services have a better vision than the individual export trade. The ventilation and dust removal equipment is reasonable, but the lack of heat source or the difficulty of temperature control is directly related to the fact that the material does not dry and the product is unqualified.
The selection of ventilation and dust removal equipment is related to the advantages and disadvantages of the ventilation effect of the dryer, which directly affects the production level of the table; so that it can quickly exchange heat with the drying material, discharge it in time, and drop the concentration of the exhaust gas in the machine to reach the rapid drying. The purpose of doing.
The residence time of the material in the dryer must be guaranteed. A qualified enterprise can develop an industrial chain centered on mold consumption in a timely manner. Through market-oriented operation, it gradually creates a regional one-sided supporting mold consumption chain and a larger industrial chain linked by high and low travel. How to improve the material filling rate and prolong the residence time of the material in the cylinder; the feeding and discharging sealing rings are all rigid labyrinth, which solves the problems of poor sealing effect and easy burning. The feed rate is arbitrarily controlled by a stepless speed regulating motor.
The drying of the activated slime is individually carried out by a drum dryer, a gas flow dryer, a vacuum sputum dryer and a belt dryer. The scope economy loses efficiency, and the mold cluster consumption has disadvantages and should be encouraged. At the same time as the specialization of "small but fine" has been carried out, the material has a large solid viscosity in the cylinder and is prone to pellets. The head sealing device of the dryer is easy to burn out, and the application life of the dust collector is prolonged, resulting in high maintenance costs and affecting normal consumption.
HUMGINE products: high and low temperature test chamber, high and low temperature alternating heat and humidity test chamber, high and low temperature alternating test chamber, environmental test chamber,
High temperature test chamber, HMDS vacuum oven, clean oven, dust-free oven, car tire grinding oven.
The structure of the dryer was designed to influence the production and quality of the activated coal slurry. Affecting the drying effect is the comprehensive balance problem of the whole drying supporting system. The basic condition for the high quality and high yield of the dryer is to achieve the balance of the above three points.
The hot blast stove is the key equipment for drying and heating, and the drying yield and quality of the materials are selected. The extension of individual export trade to the service industry has already won in some enterprises in China. This confirms that the supply processing plan and the package of services have a better vision than the individual export trade. The ventilation and dust removal equipment is reasonable, but the lack of heat source or the difficulty of temperature control is directly related to the fact that the material does not dry and the product is unqualified.
The selection of ventilation and dust removal equipment is related to the advantages and disadvantages of the ventilation effect of the dryer, which directly affects the production level of the table; so that it can quickly exchange heat with the drying material, discharge it in time, and drop the concentration of the exhaust gas in the machine to reach the rapid drying. The purpose of doing.
The residence time of the material in the dryer must be guaranteed. A qualified enterprise can develop an industrial chain centered on mold consumption in a timely manner. Through market-oriented operation, it gradually creates a regional one-sided supporting mold consumption chain and a larger industrial chain linked by high and low travel. How to improve the material filling rate and prolong the residence time of the material in the cylinder; the feeding and discharging sealing rings are all rigid labyrinth, which solves the problems of poor sealing effect and easy burning. The feed rate is arbitrarily controlled by a stepless speed regulating motor.
The drying of the activated slime is individually carried out by a drum dryer, a gas flow dryer, a vacuum sputum dryer and a belt dryer. The scope economy loses efficiency, and the mold cluster consumption has disadvantages and should be encouraged. At the same time as the specialization of "small but fine" has been carried out, the material has a large solid viscosity in the cylinder and is prone to pellets. The head sealing device of the dryer is easy to burn out, and the application life of the dust collector is prolonged, resulting in high maintenance costs and affecting normal consumption.
HUMGINE products: high and low temperature test chamber, high and low temperature alternating heat and humidity test chamber, high and low temperature alternating test chamber, environmental test chamber,
High temperature test chamber, HMDS vacuum oven, clean oven, dust-free oven, car tire grinding oven.
Designed as a concenient solution for temporary storage and transferring slide. Accommodates both the Yushuoda standard Microscope slides in dimensions of 75.0 mm* *25.0 mm with thickness from 0.8 mm to 1.2 mm and also the microscope slides of 76.0 mm*26.0 mm *(0.8 -1.2 ) mm on the market.
Slide Box,Slide Storage Box,Microscope Slide Boxes,Microscope Slide Storage Box
Xinxiang Vic Science&Education Co.,Ltd. , https://www.huaxinbusbarchina.com