Brush process of OCBS-D008
2025-07-30 10:06:08
1> Please use a TF card with a capacity of 4GB or less.
2> Before starting the flashing process, make sure to place the EBOOT and NK files on the TF card. Insert the TF card into the device. After booting up, check if the content of the TF card is visible. (Some low-quality TF cards may not be recognized by the device, so it's recommended to use a high-quality TF card.)
Flashing Process:
1" When the device is turned off, press and hold the FN key. Do not release it, then press and hold the POWER button.
2" The flashing interface will appear. Select option 1 to flash the E-BOOT file. Once completed, the device will automatically shut down.
3" Press and hold the FN key again. Keep it pressed while pressing the POWER button. The flashing interface will appear once more. This time, select option 2 to flash the NK file. After completion, the calibration interface will show up. Manually calibrate the screen and then enter the main interface.
----- Flashing process is now complete.
Related Links:
“EBOOT†and “NKâ€:![]()
http://pan.baidu.com/s/1ntFgD3j
Video Tutorial:![]()
http://pan.baidu.com/s/1pJBEJLT
**Note:** This guide is intended for users who are familiar with the flashing process. Make sure you understand the risks involved before proceeding. Always back up any important data before starting. If you're unsure about any step, consider seeking assistance from a professional or experienced user. It’s also recommended to test the TF card in another device first to ensure compatibility and functionality. If you encounter any issues during the process, double-check that all files are correctly placed on the TF card and that the card itself is working properly.2> Before starting the flashing process, make sure to place the EBOOT and NK files on the TF card. Insert the TF card into the device. After booting up, check if the content of the TF card is visible. (Some low-quality TF cards may not be recognized by the device, so it's recommended to use a high-quality TF card.)
Flashing Process:
1" When the device is turned off, press and hold the FN key. Do not release it, then press and hold the POWER button.
2" The flashing interface will appear. Select option 1 to flash the E-BOOT file. Once completed, the device will automatically shut down.
3" Press and hold the FN key again. Keep it pressed while pressing the POWER button. The flashing interface will appear once more. This time, select option 2 to flash the NK file. After completion, the calibration interface will show up. Manually calibrate the screen and then enter the main interface.
----- Flashing process is now complete.
Related Links:
“EBOOT†and “NKâ€:
Video Tutorial:
Face Massager Electric Vibrating,Face Lifting Body Facial,Face And Body Massager
Foshan Liqia Hardware Products Co., Ltd. , https://www.liqiamei.com