How to use the level

How to Use the Level: Clicks: 1661 | Release Time: May 5, 2010

The level is a commonly used tool in the construction industry. It's an instrument designed to measure vertical levels and ensure accuracy in various tasks. With high precision, ease of use, and fast results, it plays a crucial role in surveying, large-scale site measurements, marking horizontal lines on floors, and monitoring settlement. In this guide, I will walk you through how to properly use a leveling instrument. First, let’s understand the main components of the level: 1. Telescope 2. Adjustment Knob 3. Circular Level 4. Fine Adjustment Knob 5. Horizontal Brake Knob 6. Tube Level 7. Horizontal Fine Adjustment Knob 8. Tripod Now, here are the key steps for operating the level: Begin by placing the tripod on a stable surface between two unknown points. Carefully take the level from its case and mount it onto the tripod. Adjust the three base screws until the bubble in the circular level is centered. Then, align the tube level using the same method to ensure the instrument is perfectly level. Once leveled, lock the horizontal brake knob. Using the telescope, aim at the first point (point A), level the tube again, and record the reading (this is the back sight). Next, rotate the telescope to the second point (point B), adjust the tube level, and take another reading (this is the foresight). Note both values in your notebook. To calculate the height difference between the two points, use the formula: **Height Difference = Back Sight - Fore Sight** Next, if the level shows any inaccuracies, you can perform a correction. Place the instrument midway between two fixed points and mark the horizontal lines as line "a" and "b". Move the instrument closer to one of the fixed points and mark the new lines as "a'" and "b'". If the difference between "a - b" and "a' - b'" is not equal, adjust the telescope’s horizontal wire to be halfway between the two readings. Use the calibration pin to fine-tune the upper and lower screws so that the tube level aligns correctly. Repeat this process until the readings match. For maintenance and care: 1. The level is a precision optical instrument. Proper handling and storage are essential to maintain its accuracy and extend its lifespan. 2. Avoid exposing it to direct sunlight or extreme temperatures. Never disassemble the device without proper training. 3. Always turn the fine adjustment knobs gently. Do not apply excessive force. Avoid touching lenses or optical surfaces with your fingers. 4. If the instrument malfunctions, only a trained technician or authorized repair center should handle repairs. 5. After each use, clean the instrument thoroughly and store it in a dry, safe place to prevent damage. By following these steps and taking good care of your equipment, you can ensure accurate and reliable measurements every time you use the level. Whether you're working on a small project or a large construction site, a well-maintained level is an invaluable tool.

Drawing Paper & Pad

24 Sheets Aquarel Papel Para Acuarela,Watercolor 300Gsm Handbook Paper,Sketchbook For Drawing,Alcohol Marker Paper Pad

Zhoushan Shenglan Trade Co., Ltd.   , https://www.seamiart.com