Top ten purchase notes for solid wood furniture

Top ten purchase notes for solid wood furniture:

1, the function of the furniture must meet the needs of the family, the size of the furniture must be suitable for space needs. For example, the middle clearance height of the desk is greater than 580 mm; the intermediate clearance is greater than 520 mm; the seat height of the chair is 420 or 440 mm; the width of the armchair is greater than 460 mm; the space of the wardrobe is greater than 1350 mm; The space of the short coat is more than 850 mm; the depth of the hanging space is greater than 500 mm.

2. The state stipulates that the wood of general solid wood furniture must be dried. The moisture content of the wood must be less than 12%. The wood that the insects are still eroding should not be used. The parts of the exterior and the items to be stored must not have a resin capsule. So how do we judge the moisture content of wood for solid wood furniture below 12%? In fact, it is very simple. Put your palms flat and stay for 10 seconds. The feeling of thinness can be felt as long as it is dry wood. In addition, the degree of wood can be judged by the quality of the price difference wood, but it should be noted that the greater the weight of the wood, the better.

3, wooden furniture should be firm in structure, the frame should not be loose. It is not allowed to break and break. Don't buy a "three-one furniture" that uses a saw to saw a chipboard, a nail and a paint. Don't buy furniture made with "three no" drawers that don't have no slots, no flaws, and no straps at the end.

4. The components of the wood-based panels used in the furniture shall be edge-sealed, and the various accessories shall be installed with few pieces, missing nails and nails. If we choose furniture, we must stay away from the furniture without seals. The environmental protection of such furniture must also be unqualified.

5, the surface of the board (such as door panels, countertops, etc.) should be flat, no obvious warpage. In general, when the diagonal length is greater than or equal to 1400 mm, the plate warpage allowable value is greater than or equal to 3 mm.

6. The door and drawer switch should be flexible. When the drawer is pulled out by two-thirds, the sag is less than or equal to 20 mm, and the swinging bottom is less than or equal to 15 mm.

7, Mei Laijia furniture custom custom sliding door for you to introduce: wooden furniture to have completeness and stability, when the two doors open 90 degrees, hand gently pull forward, the cabinet can not automatically roll forward The glass of the bookcase door should be edging; the mirror and the dressing table should be equipped with a back plate, and the glass mirror should be fixed with a bead.

8. When the panel is covered with thin wood and other materials, it is required to be tight and flat, and no glue, degumming or bubbling is allowed.

9, the furniture surface paint film should be flat and bright, the unit or set of products should be similar in color, the product surface film does not allow wrinkles, sticky and leaking paint. The interior of the product and other painted parts should be kept clean.

10, after we have purchased the furniture, we must pay attention to the maintenance of the furniture, especially pay attention to the handling of the furniture after the purchase. Avoid bumping and scratching during handling; before loading and unloading clothes, level the cabinet first, so that the cabinet doors are evenly divided and flexible to open; the skirts and feet of the furniture should not be collided with wet mats; Do not use chemical brightener to wipe the dust. After dusting off, use a dry, damp cloth to gently wipe off the gloss. Newly purchased furniture should not be exposed to the sun, not near the heating, to prevent wood. The moisture content changes too much and causes furniture deformation.