The use of UV curing machine can not ignore the matters

If the UV curing machine wants to work normally and smoothly, some precautions must be kept in mind so as to ensure safety and ensure the efficiency of work. The following Chinese uv network for you to introduce when using the UV curing machine should pay attention to what matters.

Matters needing attention First, the use of lamps and lamp maintenance. The use of UV lamps for opening and closing is stressful. 1. Turn on the lights in sequence when turning on the lights. Each lamp is separated by about 1 minute and cannot be turned on at the same time. 2. After the lights are turned off, the fans should continue to operate for a period of time until the lamps cool down. 3, if you need to turn off the lights after the start, we must pay attention to wait for the tube bending cooling. 4, can not be used immediately after turning on the lights. Need to warm up. 5, after using the lamp for a certain period of time to reach the end of life should pay attention to replace. 6. After the UV lamp is used for a period of time, it is necessary to pay attention to the cleaning of the lamp surface. Cautions 2. With the extension of UV lamp usage time, energy will be attenuated, so pay attention to slow down the speed. Matters needing attention Third, pay attention to transformers, capacitors. The input line of the transformer needs to select the appropriate terminal according to the voltage of the site. After the capacitor is used, it must be discharged if it is repaired. Also during use, do not look directly at the surface of the lamp when turning on the light.

The use of UV curing machine, we must pay attention to these use matters, so as to ensure the safety of the operation and ensure the efficiency of the use of equipment.