Buying skills three to see two touches and one pressure
[ Chinese wardrobe net ] Due to the needs of environmental protection, there are fewer and fewer pure solid wood furniture. Most solid wood furniture is made by the combination of solid wood and wood-based panels. This process avoids the use of solid wood in large areas. At the same time of cracking and warping deformation, it not only maintains the beautiful texture of pure natural logs, but also the noble and elegant essence of solid wood furniture. Nanyang Dick furniture sales staff told reporters that because of the different processing technology, the purchase of such solid wood must be "three look and two touch one pressure."
"Three look": First look at the material. Generally good solid wood furniture, after opening the door and drawer, the wood is dry and white, the texture is clear, the texture is tight and delicate. At the same time, good solid wood furniture requires no irritating odor after opening the door or drawer.
Look at the components. When buying solid wood furniture, you should carefully check the parts of the furniture, such as the sofa legs, columns, and the load-bearing horizontal bars that are close to the ground between the columns to ensure that there are no large knots or cracks or cracks; check the sliding and positioning of the drawer. Open all the doors and drawers to see if the screws at the joints of the components are tight; whether the internal wood-based panels are edge-sealed, and the various accessories are installed with many pieces, no nails, and no nails.
Finally, look at the place of origin. If the moisture content of solid wood furniture is higher than 1% of the average moisture content of the area of ​​use, cracking, deformation, loosening, warping, etc. may occur. Therefore, it is best to buy furniture produced by a brand that has a good dry process.
"Two touches": Is to touch the surface is smooth, good solid wood furniture surface is flat, there will be no problems such as protrusions; then touch the furniture corners and other parts, if there is rough, pigment coating too thick, etc., it means that the processing technology is more inferior.
"One pressure": When selecting solid wood furniture, it is necessary to lightly press the various points of force of the furniture, such as the column corner, drawer or shelf support, etc., whether the test is stable.
Callouses Finger Protection,Finger Protection,Five Finger Protection,Finger Support Protect
Yangzhou Sainuo Star Sports Products Co., Ltd. , https://www.cnsportsgoods.com