Use of small offset printing

With the development of the printing market, small offset printing has become more and more popular, especially the development of office automation, schools, and institutions. It is also a soft spot for small offset printing.
Since most users who purchased offset printing did not perform printing, they were not familiar with small offset printing, causing many unfavorable factors in use and affecting printing.
The following is a brief discussion of the daily use of some small 8-fold offsets:
Paper. Most of the paper is offset printing writing paper, and some of the quality is not very good, which requires the paper to play, depending on the situation of the paper into a fan-shaped or long strip, the storage of the paper in particular can not be moisture deformation, otherwise, printing Easy to discount.
Ink. Ordinary ink can be, but should pay attention to the winter to add some remover, transfer ink, appropriate adjustment, indoor high temperature. If you hang a light bulb above the machine, the effect will be better, because the eight-ink road is short, thick and even ink is not good.
For offset paper, the water-based version can be wiped with water and dampened. Zinc oxide version available liquid, according to the specification can be. PS version, the liquid can be used, several types of paper liquid can not be mixed.
The machine itself should pay attention to fueling, maintenance, the new machine is best to open both sides of the shield, ground oil, more fuel, do not miss. In particular, the oil on the three roller heads, the oil eye, and the ink roller at the end of the ink roller should be taken care of not to allow the ink and dirt to be blocked, and to clean up and refuel in time.
In addition, the pressure cannot be adjusted to be too large. The paper table can not be raised too high or too low, carefully adjust the level knob, hand-driven paper to keep up, generally do not let the machine automatically over paper, to prevent smashing the machine, each time you open the machine to promptly clean the ink, etc. The machine is clean.
Although the small offset printing is small and the five kinds of internal organs are complete, we must pay attention to pressure balance, ink and water balance, and machine balance. We must strictly follow the manual operation and use, and constantly explore and learn to print high quality products. (The equipment company Ding Wanxiang)