Talk about the experience of label prepress printing

In recent years, the competition in the label market has become increasingly fierce, and the requirements of users for label printing quality have been continuously improved. At the same time, the use of narrow-width flexographic printing technology not only expands the company's business scope and production capacity, but also prepress processing and media. The selection, screen production and flexographic printing technologies have also accumulated rich experience.

First of all, in terms of prepress processing, many customers design orders based on offset or gravure printing. If this type of manuscript is printed on flexographic printing, proofs will have many quality problems. For example, the color is not in place and the level is not obvious. There are hard edges and so on. Therefore, to solve such problems, it is necessary to communicate with customers in a timely manner.

Second, we must also shop around in the selection of flexible plates. Printing companies need to cooperate fully with several plate-making companies to fully understand issues such as the use of plate materials, the production of cable screens, the transition of levels, the increase in compensation for outlets, and the rate of plate retraction. This not only facilitates production, but also controls quality parameters, avoids human interference, and reduces the occurrence of failures.

Again, because of the special nature of label printing, narrow-format flexographic printing equipment has prominent features with respect to embossing and other types of flexographic printing equipment. The narrow-width flexographic printing equipment is not only simple in operation, but also has high printing quality and operating efficiency. Strong combination, can do more kinds of products, more competitive strength.

1. Selection of color sequence The label of the flexographic printing is mainly based on the field, lines, and text. Most of the printing materials used are paper, aluminum foil, plastic film, and stickers. When water-soluble or solvent-based inks are used to print the absorbing printing materials, after the infrared hot air drying effect occurs, the materials will be pulled up and affect the overlay accuracy. Color plates containing large areas should be printed in the rear cell because the substrate is infrared dried after absorbing a large amount of ink, and the field cell's pull-in change is larger than that of other cells. If it is necessary to place the field part in the front color group, it is sensible to increase the compensation in the up and down direction to make up for the loss caused by the soaring of the printing material.

2. Notes on plate making (1) Trapping When making a flexographic plate, a certain amount of trapping facilitates the printing registration. Trapping too small or not trapping will result in misregistration (darkness) in the printing. Trapping over a large outline on the edge of the print will affect the overall effect of the label.

(2) Layout design Since the flexo printing basically uses web printing, the application of seamless sleeve technology greatly saves paper, but some flexographic printers cannot achieve on-line die cutting, but also require subsequent processing (cutting, etc.) ). Therefore, when designing the layout, it should be fully considered to leave sufficient margin for subsequent processing.

(3) Selection of raw and auxiliary materials The selection of raw and auxiliary materials should not be limited to unit price. Instead, the printing quality should be taken as the first element. The analysis of product cost should be based on paper and ink.